Skip to content
EditToolbelt

Menu

Video Storage Calculator

See how many hours of footage fit on a card or drive at a given codec bitrate.

Runs in your browser. Nothing you type is sent anywhere.

Calculate
Mbps
TB
Size unit
Recording time
22 h 13 min
In minutes
1,333min
Per hour
45 GB

Cards and drives are sold in decimal units: 1 TB is 1,000,000,000,000 bytes, which Windows shows as 931 GB. Formatting and the camera’s own files take a little more.

Typical bitrates: check your camera’s manual

Typical bitrates for common camera codecs. Your camera’s settings decide the real figure.
CodecBitrateUse it
ProRes 422 HQ, UHD 29.97p707 Mbps
ProRes 422, UHD 29.97p471 Mbps
ProRes 422 HQ, 1080 29.97p220 Mbps
ProRes 422, 1080 29.97p147 Mbps
ProRes 422 LT, 1080 29.97p102 Mbps
H.264 4K 30p, mirrorless (XAVC S)100 Mbps
H.265 4K 30p, mirrorless100 Mbps
H.265 4K 30p, phone45 Mbps
H.264 1080 30p, phone17 Mbps

ProRes figures are Apple’s for 29.97 fps; higher frame rates take more. Type your camera’s own bitrate above to replace any of these.

How to use the Recording Storage Calculator

  1. Pick what you need: the hours that fit on a card or drive, or the space a shoot needs.
  2. Pick a camera codec for its typical bitrate, or type your camera’s own bitrate in Mbps.
  3. Enter the card or drive size in GB or TB, or the hours you plan to record.
  4. Read the recording time, or the storage needed with and without a backup copy.

Why use this

  • Instant. Results update as you type, with nothing to press.
  • Private. What you type stays on this page; the link you share holds only the numbers.
  • Free, with no sign-up and no watermark.

Questions

How many hours of 4K fit on 1 TB?

At 100 Mbps, typical for 4K H.264 on mirrorless cameras, about 22 hours. At ProRes 422 HQ in UHD (707 Mbps) it is about 3 hours 8 minutes.

Why does my 1 TB drive show 931 GB?

Drives are sold in decimal units (1 TB = 1,000,000,000,000 bytes); Windows counts in binary units and still writes GB. Nothing is missing. This calculator uses the decimal units on the label.

Are the codec bitrates exact?

No, they are typical values to start from. Your camera, its settings and the frame rate decide the real bitrate: check the manual and type it in.